Ga door naar hoofdinhoud

iPhone 4 Display Assembly Replacement

Waarschuwing: Je bewerkt een vooraf vereiste handleiding. Alle wijzigingen die je hierin maakt, beïnvloeden alle 3 handleidingen die deze stap bevatten.

Engels
Nederlands
Stap 6
iPhone 4 Display Assembly Replacement: stap 0, afbeelding 1 van 1
  • Remove the three large-headed 1.5 mm Phillips screws along the SIM card side of the iPhone.

  • Keep track of the washers under each of the screws.

  • Tip: It can be tricky, but it is also possible to just loosen the large-headed 1.5 mm Phillips screws slightly, without having to remove and replace the screw-and-washer set.

  • Remove the small-headed 1.5 mm Phillips screw near the rear camera (previously removed).

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.