Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie

Onderdelen & Gereedschap

Help
Bewerken van stap 28 —

Stap type:

Sleep om te herschikken

With the belt installed, insert a 6mm hex key into the tensioner adjusting washer

Rotate the washer counterclockwise to tension the belt

During this process the tension indicator will move clockwise

Continue rotation until the tension indicator has reached the point where the mark on the tab is centered between the forks of the indicator

While preventing the tensoiner adjusting washer from moving, torque the 10mm bolt to 25 Nm

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.