Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie

Winkel

Help
Bewerken van stap 21 —

Stap type:

Sleep om te herschikken

Underneath the exhaust manifold there is a 13mm plug where the crankshaft stopper must be inserted. Use a wrench to remove the stud

Using the longer stopper, fully insert and screw it in until snug.

This will prevent the crankshaft from moving clockwise past TDC. With the stopper in place rotate the engine clockwise until it no longer turns. The crankshaft will be at exactly TDC.

This will not prevent the engine from rotating counter clockwise. Never rotate the engine counterclockwise

Do not use the stopper to prevent engine rotation. Always restrain engine movement with a proper tools

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.