Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie

Onderdelen & Gereedschap

Help
Bewerken van stap 17 —

Stap type:

Sleep om te herschikken

There is one 18mm bolt holding the harmonic balancer pulley in place

Care must be taken to not allow the engine to rotate counterclockwise during its removal

During reassembly the bolt must be torqued to 115 Nm

After the bolt is removed, the pulley should slide off

The pulley is keyed, and must be in the correct orientation during reassembly

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.