Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie

Onderdelen & Gereedschap

Help
Bewerken van stap 15 —

Stap type:

Sleep om te herschikken

Using a block of scrap wood between a hydraulic jack and the oil pan, use the jack to support the engine

Do not lift the engine! Merely allow it to rest on the jack.

Mark the position of the motor mount relative to the car frame with a sharpie

There are three 15mm bolts holding the motor mount to the car frame.

During reassembly these bolts must be torqued to 48 Nm

There are two 18mm nuts holding the motor mount to the engine

It is normal for the stud to come out with these nuts

During reassembly these bolts must be torqued to 80 Nm

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.