Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie

Onderdelen & Gereedschap

Help
Bewerken van stap 11 —

Stap type:

Sleep om te herschikken

There are three 13mm bolts holding the water pump pulley to the water pump

You can use a strap wrench to prevent the pulley from rotating

You can also use a flat head screwdriver to prevent rotation

During reassembly, snug the bolts to hand tight, install the accessory belt, then torque down the bolts

Gently remove the pulley

While it is not necessary to remove the water pump, it is a great time to change it!

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.