Waarschuwing: Je bewerkt een vooraf vereiste handleiding. Alle wijzigingen die je hierin maakt, beïnvloeden alle 2 handleidingen die deze stap bevatten.
Stap 4 vertalen
Stap 4
-
Using a JIS #00 screwdriver, remove the two screws that were revealed when the optical drive was removed.
-
Use a Phillips #0 screwdriver to remove all screws that are visible on the bottom.
-
There is an oval tab near the center of the laptop, use the flat end of a nylon spudger to wedge it free to reveal another Phillips #0 screw.
Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.