Ga door naar hoofdinhoud

Wijzigingen in stap #3

Bewerken voor Taylor Dixon

Bewerking goedgekeurd door Taylor Dixon

Verwijderd
Toegevoegd
Ongewijzigd

Stap regels

[* icon_note] In the following steps you will be cutting through the adhesive around the edge of the display assembly.
[* black] Refer to the second and third images and familiarize yourself with the width of the adhesive around edges of the display.
[* redicon_caution] If you plan to re-use the display assembly, be particularly careful as you cutnot to insert the adhesive on the sides of the phone. Don't insert your toolpick more than 2 mm into the long edges of the phone, and angle it down (away from the display assembly) as much as possible.
[* redicon_caution] If you plan to re-use the display assembly, be particularly careful as you cutnot to insert the adhesive on the sides of the phone. Don't insert your toolpick more than 2 mm into the long edges of the phone, and angle it down (away from the display assembly) as much as possible.