Ga door naar hoofdinhoud

Wijzigingen in stap #2

Bewerken voor Taylor Dixon

Bewerking goedgekeurd door Taylor Dixon

Verwijderd
Toegevoegd
Ongewijzigd

Stap regels

[* black] [guide|25705|Prepare an iOpener|new_window=true] and heat the front of the phone along its left edge for about two minutes, or until it's slightly too hot to touch. This will help soften the adhesive securing the display.
[* [* icon_note] You may need to reheat and reapply the iOpener several times to get the phone warm enough to cut the adhesive. Follow the iOpener instructions to avoid overheating.
[* [* icon_note] You may need to reheat and reapply the iOpener several times to get the phone warm enough to cut the adhesive. Follow the iOpener instructions to avoid overheating.
[* icon_caution] A hair dryer, heat gun, or hot plate may also be used, but be careful not to overheat the phone—the display and internal battery are both susceptible to heat damage.