Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie

Onderdelen & Gereedschap

Wijzigingen aan stap #6

Bewerking door Josh Calvetti

Bewerking goedgekeurd door Josh Calvetti


Stap regels

[title] Re-enable SIP
[* black] Unless you have a compelling reason otherwise, you'll want to reenable SIP. Once again, you'll have to go into Recovery Mode just like you did before and open the Terminal.
[* black] Enter the following command
[* black] '''csrutil enable'''
[* black] Reboot the machine and let it load to the desktop. Open a new terminal window and enter the following command to check the status of SIP
[* black] '''csrutil status'''
[* black] If all was successful, you should get a line back that reads:
[* black] ''System Integrity Protection status: enabled.''