Ga door naar hoofdinhoud

Wijzigingen aan stap #1

Bewerking door Patrick

Bewerking goedgekeurd door Patrick

Voor
Na
Ongewijzigd

Stap regels

[* black] Lodge a Jimmy betweenicon_caution] Apply heat as necessary around the frontedges of the screen andto loosen the adhesive, but be careful not to melt the plastic frame of the tablet.
[* black] Starting on
the side of the devicetablet near the bottom, heat the area and insert a metal jimmy or opening pick between the digitizer and the frame.
[* black] SlideSeparate the Jimmy aroundadhesive on the edgebottom of the device, disconnectingtablet first, then work up the screen fromsides. The digitizer ribbon cable is located at the tablettop.
[* black] Lodge a Jimmy betweenicon_caution] Apply heat as necessary around the frontedges of the screen andto loosen the adhesive, but be careful not to melt the plastic frame of the tablet.
[* black] Starting on
the side of the devicetablet near the bottom, heat the area and insert a metal jimmy or opening pick between the digitizer and the frame.
[* black] SlideSeparate the Jimmy aroundadhesive on the edgebottom of the device, disconnectingtablet first, then work up the screen fromsides. The digitizer ribbon cable is located at the tablettop.
[* icon_caution] The screen may crack during removal, so be wary of broken glass.