Ga door naar hoofdinhoud

Wijzigingen aan stap #4

Bewerking door Andrew Bookholt

Wachtend op goedkeuring

Voor
Na
Ongewijzigd

Stap regels

[* red] Removeblack] Gently peel the two Phillips screws securinginverter cable ground strap off the right AirPort antenna tocast aluminum frame of the clutch hinge frameworkhinges.
[* black] While pulling the inverter cable away from its socket on the inverter board, use the tip of a spudger to push the connector out of its socket.
[* icon_note] If the connector won't budge from its socket, insert a metal spudger or similar tool into the gap between the connector and its socket and twist to separate the two pieces
.
[* red] Removeblack] Gently peel the two Phillips screws securinginverter cable ground strap off the right AirPort antenna tocast aluminum frame of the clutch hinge frameworkhinges.
[* black] While pulling the inverter cable away from its socket on the inverter board, use the tip of a spudger to push the connector out of its socket.
[* icon_note] If the connector won't budge from its socket, insert a metal spudger or similar tool into the gap between the connector and its socket and twist to separate the two pieces
.

Afbeelding 1

Oude versie

Nieuwe versie

Afbeelding 2

Geen vorige afbeelding

Toegevoegd

Afbeelding 3

Geen vorige afbeelding

Toegevoegd