Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie

Winkel

Wijzigingen aan stap #3

Bewerking door pollytintop

Bewerking goedgekeurd door pollytintop

Voor
Na
Ongewijzigd

Stap regels

[* blue] theThe LCD ribbon cable is folded under the holder. Do not try to remove the LCD yet. It will tear the ribbon cable.
[* blue] theThe LCD ribbon cable is folded under the holder. Do not try to remove the LCD yet. It will tear the ribbon cable.
[* blue] Fold the LCD way from the holder. Remove the four screws that secure the holder to the logic board.
[* red] With the LCD holder out of the way, you can now open the ribbon cable connector. Use your fingernails to flip the white clasp away from the ribbon cable side. This will disconnect the cable. Remove the LCD and replace with the new one.