Repareer je spullen

Recht op reparatie

Winkel

Wijzigingen aan stap #3

Bewerking door oldturkey03 —

Bewerking goedgekeurd door oldturkey03

Voor
Na
Ongewijzigd

Stap regels

[* black] Insert wisdom hereblue] the LCD ribbon cable is folded under the holder. Do not try to remove the LCD yet. It will tear the ribbon cable.
[* blue] Fold the LCD way from the holder. Remove the four screws that secure the holder to the logic board.
[* red] With the LCD holder out of the way, you can now open the ribbon cable connector. Use your fingernails to flip the white clasp away from the ribbon cable side. This will disconnect the cable. Remove the LCD and replace with the new one.
[* black] Insert wisdom hereblue] the LCD ribbon cable is folded under the holder. Do not try to remove the LCD yet. It will tear the ribbon cable.
[* blue] Fold the LCD way from the holder. Remove the four screws that secure the holder to the logic board.
[* red] With the LCD holder out of the way, you can now open the ribbon cable connector. Use your fingernails to flip the white clasp away from the ribbon cable side. This will disconnect the cable. Remove the LCD and replace with the new one.

Afbeelding 1

Oude versie

Nieuwe versie

Afbeelding 2

Oude versie

Nieuwe versie

Afbeelding 3

Oude versie

Nieuwe versie