Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie

Winkel

Wijzigingen aan stap #7

Bewerking door Jake Devincenzi

Wachtend op goedkeuring

Voor
Na
Ongewijzigd

Stap regels

[* red] Remove the outer four 5.3 mm T8 Torx screws holding the hinges in place.
[* icon_note] Do not remove the two innermostinner-most screws just yet.
[* icon_note] Do not remove the two innermostinner-most screws just yet.
[* black] Open the device between 90 and 100 degrees, then rest it on its side.
[* red] While supporting both halves of the device with one hand, unscrew the upper 5.3 mm T8 Torx screw.
[* red] Repeat the same process for the identical bottom screw.
[* icon_caution] Be sure to hold the display and upper case together with one hand. Failure to do so may cause the freed display/upper case to fall, potentially damaging each component.