Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie

Winkel

Wijzigingen aan stap #2

Bewerking door Walter Galan

Bewerking goedgekeurd door Walter Galan

Voor
Na
Ongewijzigd

Stap regels

[* black] Carefully slideInsert the edge of a plastic opening tool underunderneath the thick partupper microphone.
[* black] Slide the blade
of a plastic opening tool along the bottom of the upper microphone, releasing the microphone cableadhesive.
[* black] Carefully slideInsert the edge of a plastic opening tool underunderneath the thick partupper microphone.
[* black] Slide the blade
of a plastic opening tool along the bottom of the upper microphone, releasing the microphone cableadhesive.
[* icon_caution] Be careful when releasing the adhesive holding the cable down, as these cables have been known to tear easily.
[* black] SlideIn a similar manner, release the plastic opening tool along the length of the cable until you release all ofadhesive underneath the adhesivelower microphone.
[* black] SlideIn a similar manner, release the plastic opening tool along the length of the cable until you release all ofadhesive underneath the adhesivelower microphone.
[* black] Lift the cable out of the device.