Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie

Onderdelen & Gereedschap

Wijzigingen aan stap #11

Bewerking door Julian Bastmeijer

Bewerking geweigerd door Jeff Suovanen

Verwijderd
Toegevoegd
Ongewijzigd

Stap regels

[* black] Lifting from the side nearest the battery, rotate the logic board toward the top of the MacBook Pro.
[* black] Using the flat end of a spudger, carefully push the MagSafe 2 connector out of its socket on the bottom of the logic board. Note: there is a small "lock" on the connector that you need to push using the point of the spudger, in order to disassemble the connector.
[* black] Using the flat end of a spudger, carefully push the MagSafe 2 connector out of its socket on the bottom of the logic board. Note: there is a small "lock" on the connector that you need to push using the point of the spudger, in order to disassemble the connector.
[* icon_reminder] When reinstalling the logic board, check the cables at the marked locations to make sure they don't get pinned underneath the logic board.
[* red] Clockwise from top: keyboard, trackpad, battery, right speaker, keyboard backlight, display, microphone, headphone jack, left speaker.