Ga door naar hoofdinhoud

Wijzigingen aan stap #4

Bewerken voor Jake Devincenzi

Wachtend op goedkeuring

Voor
Na
Ongewijzigd

Stap regels

+[* red] Remove the four outer 5.3 mm T8 Torx screws from the hinges.
+ [* icon_note] Leave the other two screws in until you have rotated the device.
+[* black] Open the laptop to about 90 degrees, then rest it on its side.
+[* black] While holding both halves of the device with one hand, unscrew the two remaining 5.3 mm T8 Torx screws.

Afbeelding 1

Geen vorige afbeelding

Toegevoegd

Afbeelding 2

Geen vorige afbeelding

Toegevoegd

Afbeelding 3

Geen vorige afbeelding

Toegevoegd