Wijzigingen aan stap #4
Bewerking door Brett Hartt —
- Voor
- Na
- Ongewijzigd
Stap regels
[* red] Remove the four outer 5.3 mm T8 Torx screws from the hinges. |
[* icon_note] [* black] Open the laptop to about 90 degrees, then rest it on its side. [* black] While holding both halves of the device with one hand, unscrew the two remaining 5.3 mm T8 Torx screws |
[* icon_note] [* black] Open the laptop to about 90 degrees, then rest it on its side. [* black] While holding both halves of the device with one hand, unscrew the two remaining 5.3 mm T8 Torx screws |
Afbeelding 2
Verwijderd
Afbeelding 3
Verwijderd