Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie

Onderdelen & Gereedschap

Wijzigingen aan stap #11

Bewerking door Jeff Suovanen

Bewerking goedgekeurd door Jeff Suovanen

Voor
Na
Ongewijzigd

Stap regels

[* black] Carefully turnclose the MacBook overand flip it over once again, so that the lower case lays flatApple logo faces up.
[* black] RaiseLifting from the front edge, raise the upper case/display assembly to about a 90° angle, and prop it up against something sturdy so you don't have to hold it.
[* black] Carefully turnclose the MacBook overand flip it over once again, so that the lower case lays flatApple logo faces up.
[* black] RaiseLifting from the front edge, raise the upper case/display assembly to about a 90° angle, and prop it up against something sturdy so you don't have to hold it.
[* black] Add a piece of tape near the track pad to secure the upper case and prevent accidental movement.
[* icon_caution] It's possible to open the MacBook all the way and lay both sides down flat, but this may damage the flex cables and is not recommended.

Afbeelding 1

Oude versie

Nieuwe versie

Afbeelding 2

Oude versie

Nieuwe versie

Afbeelding 3

Geen vorige afbeelding

Toegevoegd