Wijzigingen aan stap #3
Bewerken voor Eric Essen —
- Voor
- Na
- Ongewijzigd
Stap regels
| [* black] Carefully lift the logic board up and pull it away from you. | |
| - | [* icon_note] This step requires some force, but if the logic board will not come up, make sure that you have removed all the necessary screws and connectors. |
| + | [* icon_note] This step requires some force, but if the logic board will not come up, make sure that you have removed all the necessary screws and connectors. Warming the heatsink with a heatgun or blow dryer will help release the logic board. |
| [* icon_note] On 800 MHz and above G4s, you must disconnect the fan cable from the logic board before you lift the board entirely off. |