Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie

Winkel

Wijzigingen aan stap #14

Bewerking door Dominik Schnabelrauch

Bewerking goedgekeurd door Dominik Schnabelrauch

Voor
Na
Ongewijzigd

Stap regels

[* black] Remove the seven screws securing the logic board:
[* red] One 1.3 mm Phillips screw
[* orange] Two 2.1 mm standoff screws
[* yellow] Two 2.0 mm standoff screws
[* green] Two 2.2 mm standoff screws
[* icon_note] If you don't haveStandoff screws are best removed using an [product|IF145-343|new_window=true] and [product|IF145-326|driver handle|new_window=true].
[* icon_caution] In
a [product|IF145-373-71|standoff bit|new_window=true], you can usepinch, a small flathead driverscrewdriver will do the job—but use extra caution to remove standoff screws—just make sureensure it doesn't slip and damage surrounding components.
[* icon_note] If you don't haveStandoff screws are best removed using an [product|IF145-343|new_window=true] and [product|IF145-326|driver handle|new_window=true].
[* icon_caution] In
a [product|IF145-373-71|standoff bit|new_window=true], you can usepinch, a small flathead driverscrewdriver will do the job—but use extra caution to remove standoff screws—just make sureensure it doesn't slip and damage surrounding components.