Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie

Winkel

Wijzigingen aan stap #12

Bewerking door Jeff Suovanen

Bewerking goedgekeurd door Jeff Suovanen

Voor
Na
Ongewijzigd

Stap regels

[* black] Insert wisdom hereUse a thin pry tool or tweezers to carefully pry up and disconnect the two coaxial cable connectors from the logic board.
[* icon_reminder] During reassembly, these can be tricky to reconnect. One at a time, hold each connector in place over its socket and press down with the flat of your spudger. The connector should snap into place
.
[* black] Insert wisdom hereUse a thin pry tool or tweezers to carefully pry up and disconnect the two coaxial cable connectors from the logic board.
[* icon_reminder] During reassembly, these can be tricky to reconnect. One at a time, hold each connector in place over its socket and press down with the flat of your spudger. The connector should snap into place
.