Wijzigingen aan stap #8
Bewerken voor Arthur Shi —
Bewerking goedgekeurd door Arthur Shi
- Voor
- Na
- Ongewijzigd
Stap regels
| [title] Desolder Omron Switch | |
| - | [* black] With the upper PCB removed, you can now flip it upside down and desolder the Omron Switch. (Make a note of which way the switch is facing!) However, the board was marked on mine to show the orientation of the switches (see added picture of PCB and cat hair!) |
| + | [* black] With the upper PCB removed, you can now flip it upside down and desolder the Omron Switch. (Make a note of which way the switch is facing!) |
| + | [* icon_note] Your board may be marked to show the orientation of the switches (see added picture of PCB and cat hair!) |
| [* black] Clean off any excess solder from the component mounting point of the Omron switch. | |
| [* black] Mount new switch on with the white click button facing the same direction as the old switch. | |
| [* black] It's okay to burn the switch a little (since it's dead anyways right?) but try not to let the soldering iron touch any of the other solder points when soldering/desoldering the new/old switch. |