Wijzigingen aan stap #3
Bewerken voor Jimmy Tang —
Bewerking goedgekeurd door Jimmy Tang
- Voor
- Na
- Ongewijzigd
Stap regels
| + | [title] Opening up the Mouse! |
|---|---|
| + | [* black] Use a small 2 or 3mm screw driver to take out the five screws at the bottom. |
| + | [* black] Keep the screws in a safe place! |
| + | [* black] The top and bottom shells of the mouse should open up fairly easily. If not, poke a spludger or guitar pick or even just your fingernail into the split between the shiny and matte plastic and the shell should pop right off. |
| + | [* black] When the top shell comes apart, be careful not to pull too hard as there is a connection wire that connects the side buttons to the upper PCB! |
Afbeelding 1
Geen vorige afbeelding
Toegevoegd