Repareer je spullen Gemeenschap Winkel

Wijzigingen aan stap #9

Bewerken voor Adam O'Camb —

Bewerking goedgekeurd door Adam O'Camb

Voor
Na
Ongewijzigd

Stap regels

-[* black] Use a detail brush to gently scrub away any corrosion and liquid residue on the logic board and other components.
- [* icon_caution] Be carful not to push down too hard with the brush on delicate logic board components.
+[* black] Use a soft brush (like a toothbrush or [product|IF145-062-1|detailing brush|new_window=true]) to gently scrub away any corrosion and liquid residue on the logic board and other components.
+ [* icon_caution] It's possible to break small solder joints with too much force from the brush. Use just enough force to remove the corrosion and residue.
[* icon_note] Pay special attention to cable ends, battery contacts, connectors, pins, and fuses as these parts are prone to corrosion and can easily cause the phone to malfunction.
- [* black] Keep the logic board and any other alcohol-covered components over a cloth to avoid spilling any alcohol. Contact with alcohol can damage certain materials.
-[* black] If needed, repeat steps 9 and 10 until all corrosion and residue is gone.
+ [* black] Keep the logic board and any other alcohol-covered components over a cloth. There's a chance the alcohol can damage or mark your work surface.
+[* black] If needed, repeat steps 8 and 9 until all corrosion and residue is gone.