Ga door naar hoofdinhoud

Wijzigingen aan stap #6

Bewerking door Andrew Bookholt

Wachtend op goedkeuring

Voor
Na
Ongewijzigd

Stap regels

[* red] Remove two T6 Torx screws securing the AirPort/Bluetooth board to the logic board.
[* black] Lift the AirPort/Bluetooth board outup from its left edge to separate it from its socket on the logic board.
[* icon_caution] Lift the AirPort/Bluetooth board from its left edge only. Trying to lift from its right edge may break the connector off
the logic board.
[* black] Lift the AirPort/Bluetooth board outup from its left edge to separate it from its socket on the logic board.
[* icon_caution] Lift the AirPort/Bluetooth board from its left edge only. Trying to lift from its right edge may break the connector off
the logic board.