Ga door naar hoofdinhoud

Wijzigingen aan stap #6

Bewerking door Andrew Bookholt

Wachtend op goedkeuring

Voor
Na
Ongewijzigd

Stap regels

-[* black] Disconnect the power cable connector from the logic board by squeezing the two lock tabs and pulling it straight away from its socket.
+[* black] Disconnect the DC-in cable by simultaneously depressing both locking arms and pulling its connector away from the socket on the logic board.
+[* icon_note] After both locking arms pass their retaining tabs, it is helpful to push them toward the left edge of your iMac with one hand while pulling on the body of the connector with your other hand.