Ga door naar hoofdinhoud

Wijzigingen aan stap #7

Bewerking door Scott Havard

Bewerking goedgekeurd door Scott Havard

Voor
Na
Ongewijzigd

Stap regels

-[* black] We see connectors on the logic board but no cables. Could it be that they run under the speakers? That's no fun
-[* black] Lifting up a strip of padded conductive tape, we find: screws! [guide|52599|new_window|stepid=115456] we had a pretty sad time with Pro speakers, so screws are a good sign.
-[* black] Well, the speaker is one combined unit but it was no fun to pry off the rear case. Luckily the speakers are spring contact connected. The headphone jack is connected to the speaker pad's interconnect cable thing.
+[* black] As we delve deeper into the shallow device, we realize we haven't spotted any cables yet...
+ [* icon_caution] We have a hunch this means we are needing to dive even deeper to find them.
+[* black] Lifting up a strip of padded conductive tape, we find screws! [guide|52599|Last time|stepid=115456|new_window=true] we had a sad time with removing Pro speakers, so screws are a good sign.
+[* black] ''Psych''. Screws are cool, but it didn't keep us from having to fight through adhesive to remove the speakers.
+[* black] We still don't discover connection cables, as the speakers are connected via spring contact.
+[* black] Wait! There is a small cable connecting the headphone jack to the speaker assembly.