Ga door naar hoofdinhoud

Wijzigingen aan stap #7

Bewerking door Jeff Suovanen

Bewerking goedgekeurd door Jeff Suovanen

Voor
Na
Ongewijzigd

Stap regels

-[* black] As we delve deeper into the shallow device, we realize we haven't spotted any cables yet...
- [* icon_caution] We have a hunch this means we need to dive even deeper to find them.
+[* black] As we delve deeper into the shallow device, we realize we haven't spotted any cables yet.
+[* black] We find this 3.5 mm headphone jack and speaker driver right where we expect ...
+[* black] ... but instead of routing their ribbon cables over the top of the speaker resonance chamber like in their [guide|52599|12.9" counterparts|stepid=115438|new_window=true], Apple has tucked the cables rather inconveniently ''underneath''—that is, sandwiched between the speaker and rear case.
+[* black] Looks like this speaker will have to come out, but it doesn't want to budge.
[* black] Lifting up a strip of padded conductive tape, we find screws! [guide|52599|Last time|stepid=115456|new_window=true] we had a sad time removing Pro speakers, so screws are a good sign.
-[* black] ''Psych''. Screws are cool, but they didn't save us from fighting through adhesive to remove the speakers.
-[* black] We still don't discover connection cables, as the speakers are connected via spring contact.
-[* black] Wait! There is a small cable connecting the headphone jack to the speaker assembly.
+[* black] ''Psych''—screws are cool, but they didn't save us from fighting through adhesive to remove the speakers.

Afbeelding 3

Verwijderd