Ga door naar hoofdinhoud

Wijzigingen aan stap #1

Bewerking door Paul Barnfather

Bewerking goedgekeurd door Paul Barnfather

Voor
Na
Ongewijzigd

Stap regels

[title] Remove the output sprocket
[* black] Bend down the tab washer securing the large sprocket nut.
[* black] Undo the nut with a deep 38mm socket and a power bar.
-[* icon_caution] The nut is ***left hand thread*** and may be very tight. Use an old chain to secure the gearbox in a vice.
+[* icon_caution] The nut is ***left hand thread*** and may be very tight. Use an old chain to secure the gearbox sprocket in a vice.
[* black] Remove the sprocket from the output shaft.