Repareer je spullen Gemeenschap Winkel

Wijzigingen aan stap #1

Bewerken voor Andrew Bookholt —

Wachtend op goedkeuring

Voor
Na
Ongewijzigd

Stap regels

[* black] Remove the following 12 screws securing the front bezel to the rear case:
[* red] Eight 13 mm T8 Torx.
[* orange] Four 25 mm T8 Torx.
- [* icon_note] On 24" model A1225, bottom centre two are long (26mm), four on sides (two left, two right) are medium (18mm), and the remaining 6 (four top, two bottom corners) are short (14mm).
+[* icon_note] On the 24" iMac Intel Model A1225, the bottom center two screws are long (26mm), four on sides (two left, two right) are medium (18mm), and the remaining 6 (four top, two bottom corners) are short (14mm).