Wijzigingen aan stap #5
Bewerken voor Andrew Optimus Goldheart —
Bewerking goedgekeurd door Andrew Optimus Goldheart
- Voor
- Na
- Ongewijzigd
Stap regels
| [* black] With the LCD lifted, disconnect the LCD cable by pulling down. | |
| [* icon_caution] The LCD cable is attached to the underside of the power supply; be careful where you put your fingers so you don't get zapped by a capacitor. | |
| - | [* black] Replacing this cable is the hardest part of the repair. I connect the cable then screw the board down. Note that the 2 screws holding the board down closer to the hard drive have finer threads than the other 2. |
| + | [* icon_reminder] On reassembly, you may find it helpful to remove the power supply, reconnect the LCD power cable, and then reinstall the power supply. |
| + | [* black] Alternatively, the LCD power cable can be disconnected from the LCD, rather than the power supply. |