Ga door naar hoofdinhoud

Wijzigingen aan stap #3

Bewerken voor kevin

Bewerking geweigerd door Evan Noronha

Voor
Na
Ongewijzigd

Stap regels

[* black] Disconnect the display data cable connector from its socket on the logic board by pulling the attached plastic tab towards you and away from the iMac.
+[* black] The black ribbon cable is located to the right of center. (I had difficulty locating this due to the closeup picture and the hand covering the plug. but found it skipping this step and carefully lifting the panel to find the only attached cable.)