Repareer je spullen Gemeenschap Winkel

Wijzigingen aan stap #1

Bewerken voor Walter Galan —

Wachtend op goedkeuring

Voor
Na
Ongewijzigd

Stap regels

-[* black] Pull the LCD temperature sensor connector straight up out of its socket on the logic board.
-[* black] If necessary, de-route the LCD temperature sensor cable from behind the logic board.
+[* black] Disconnect the LCD temperature sensor by pulling the connector straight out of its socket on the logic board.
+[* icon_note] If necessary, de-route the LCD temperature sensor cable from behind the logic board.