Ga door naar hoofdinhoud

Wijzigingen aan stap #17

Bewerking door Saima Teasha

Bewerking goedgekeurd door Kristen Gismondi

Voor
Na
Ongewijzigd

Stap regels

[title] removing LCD cable
[* black] Use a spudge to remove the tape/sticker.
[* icon_caution] Be very gentle and careful with this step because the connector is a hard-to-remove ribbon cable with a bunch of small cables. Ripping one of them will damage the ribbon cable, and will cause bad or no screen.
-[* icon_note] it is recommended to use an IC extractor to remove the LCD connector (however, you can use two small flat-had screwdrivers, or tweezers to slide the connector out o the socket).
+[* icon_note] It is recommended to use an IC extractor to remove the LCD connector (however, you can use two small flat-had screwdrivers, or tweezers to slide the connector out o the socket).