Ga door naar hoofdinhoud

Wijzigingen aan stap #17

Bewerking door Saima Teasha

Bewerking goedgekeurd door Kristen Gismondi

Voor
Na
Ongewijzigd

Stap regels

[title] removing LCD cable
-[* black] removing LCD connector
-[* black] first remove the tape/ sticker , use a spudger.
-[* icon_caution] be very gently and careful doing this step, the connector is a hard to remove ribbon cable with a bunch of tiny little small cables. : ripping one of them will damage the ribbon cable and will cause bad or no screen.
-[* black] use a IC extractor to do this. If you don't have a IC extractor , you can use 2 small flat head screwdrivers or the points of tweezers to slide the connector out of the socket. but if you can use the IC extractor.
+[* black] Use a spudge to remove the tape/sticker.
+[* icon_caution] Be very gentle and careful with this step because the connector is a hard-to-remove ribbon cable with a bunch of small cables. Ripping one of them will damage the ribbon cable, and will cause bad or no screen.
+[* icon_note] it is recommended to use an IC extractor to remove the LCD connector (however, you can use two small flat-had screwdrivers, or tweezers to slide the connector out o the socket).