Ga door naar hoofdinhoud

Wijzigingen aan stap #10

Bewerking door Saima Teasha

Bewerking goedgekeurd door Kristen Gismondi

Voor
Na
Ongewijzigd

Stap regels

[title] removing upper plate/case
-[* black] now we can remove the final screws and cables.
-[* red] remove the srew that is circled red in picture 2
-[* orange] remove the white ribbon cable from the connector. ( first remove the tape over the cable and connector)Same way you removed the keyboard ribbon cable. : open up the lid with spudger and remove ( gently the ribbon cable. be carefull cause the ribbon cable is pasted to the plate.
-[* black] this ribbon cable is the connector from the ON/OFF switch.
+[* red] Remove the screw circled in picture 2.
+[* orange] Remove the white ribbon cable from the connector.
+[* orange] Remove the tape over the cable and the connector.
+[* orange] Open up the lid with a spudger, and gently remove the ribbon cable.
+[* icon_caution] Be careful because the ribbon cable is pasted tot the plate.
+[* icon_note] This ribbon cable is the connector from the ON/OFF switch.