Ga door naar hoofdinhoud

Wijzigingen aan stap #10

Bewerking door Kevin D

Bewerking goedgekeurd door Kevin D


Stap regels

[title] removing upper plate/case
[* black] now we can remove the final screws and cables.
[* red] remove the srew that is circled red in picture 2
[* orange] remove the white ribbon cable from the connector. Same way you removed the keyboard ribbon cable. : open up the lid with spudger and remove ( gently the ribbon cable. be carefull cause the ribbon cable is pasted to the plate.
+[* black] this ribbon cable is the connector from the ON/OFF switch.