Ga door naar hoofdinhoud

Wijzigingen aan stap #10

Bewerking door Oliver Myers

Bewerking goedgekeurd door Justin Ogihara

Voor
Na
Ongewijzigd

Stap regels

[title] removing upper plate/case
-[* red] Remove the screw circled in picture 2.
+[* red] Remove the screw circled in the second picture.
+[* orange] Remove the tape over the cable and the connector.
[* orange] Remove the white ribbon cable from the connector.
-[* orange] Remove the tape over the cable and the connector.
[* orange] Open up the lid with a spudger, and gently remove the ribbon cable.
-[* icon_caution] Be careful because the ribbon cable is pasted tot the plate.
+[* icon_caution] Use caution, as the ribbon cable is pasted to the plate.
[* icon_note] This ribbon cable is the connector from the ON/OFF switch.

Afbeelding 2

Oude versie

Nieuwe versie

Afbeelding 3

Oude versie

Nieuwe versie