Ga door naar hoofdinhoud

Wijzigingen aan stap #9

Bewerking door Oliver Myers

Bewerking goedgekeurd door Justin Ogihara

Voor
Na
Ongewijzigd

Stap regels

[title] removing keyboard / ribbon cable
[* black] Gently lift the keyboard up.
[* black] Spot the thin ribbon cable attached to the connector (the connector has a plastic lid).
[* black] Carefully open the lid with a spudger and slide the ribbon cable out of the connector.
-[* icon_caution] Be very gently with the cable and the connector because the lid may come loose. If this happens, it is difficult to put the cable and the connector back in.
-[* black] Close the lid again, after removing the cable, so that the cable cannot jump out.
+[* icon_caution] Be very gently with the cable and the connector as the lid may come loose.
+[* black] Close the lid after removing the cable so that the cable cannot fall out.