Ga door naar hoofdinhoud

Wijzigingen aan stap #9

Bewerking door Saima Teasha

Bewerking goedgekeurd door Kristen Gismondi

Voor
Na
Ongewijzigd

Stap regels

[title] removing keyboard / ribbon cable
-[* black] now gently lift up the keyboard
-[* black] now you will see the very thin ribbon cable attached to a connector.
-[* black] That connector has a plastic lid. gently open the lid with a spudger and slide the ribbon cable out of the connector.
-[* black] be very gently with cable and connector. the lid can come loose , if this happens, it is very hard to put it back in.
-[* black] after removing the cable , close the lid again, so it can't jump out.
+[* black] Gently lift the keyboard up.
+[* black] Spot the thin ribbon cable attached to the connector (the connector has a plastic lid).
+[* black] Carefully open the lid with a spudger and slide the ribbon cable out of the connector.
+[* icon_caution] Be very gently with the cable and the connector because the lid may come loose. If this happens, it is difficult to put the cable and the connector back in.
+[* black] Close the lid again, after removing the cable, so that the cable cannot jump out.