Ga door naar hoofdinhoud

Wijzigingen aan stap #4

Bewerking door Suki-san

Bewerking goedgekeurd door Kyle Wiens

Voor
Na
Ongewijzigd

Stap regels

[title] screws of the case 1
-[* red] Remove the screws holding the plastic case by using a sharp Stanley knife, and then use a spudger to pry the rubber cushions open.
-[* icon_note] There are two hidden screws under the right and left rubber cushions (next to the battery).
-[* icon_caution] The screws are not easy to remove.
+[* red] Remove the rubber rests on the rear of the device, near the battery.
+[* orange] Remove the hidden screws placed under the rests using a #1 Philips driver.

Afbeelding 3

Oude versie

Nieuwe versie