Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie

Winkel

Wijzigingen aan stap #3

Bewerking door Andrew Bookholt

Wachtend op goedkeuring

Voor
Na
Ongewijzigd

Stap regels

[* black] Grab the front bezel near the top edge of the iMac and lift it straight up off the rear case.
[* icon_caution] The front bezel is still attached to the iMac by two cables.
[* icon_note] If your front bezel does not immediately lift off the rear case, lift the lower edge of the front bezel for enough clearance to insert a spudger near the top corners of the bezel and push up the two metal arms locking the bezel to the rear case.
[* icon_note] If your front bezel does not immediately lift off the rear case, lift the lower edge of the front bezel for enough clearance to insert a spudger near the top corners of the bezel and push up the two metal arms locking the bezel to the rear case.