Ga door naar hoofdinhoud

Wijzigingen in stap #3

Bewerken voor Andrew Bookholt

Wachtend op goedkeuring

Verwijderd
Toegevoegd
Ongewijzigd

Stap regels

[* black] OnceGrab the small bridgefront bezel near the top edge of material has cleared the RAM arms,iMac and lift it straight up off the rear case.
[* icon_caution] The
front bezel is still attached to the iMac by itstwo cables.
[* icon_note] If your front bezel does not immediately lift off the rear case, lift the
lower edge justof the front bezel for enough clearance to insert a spudger and push up the two metal arms locking the bezel to clear the rear case.
[* black] OnceGrab the small bridgefront bezel near the top edge of material has cleared the RAM arms,iMac and lift it straight up off the rear case.
[* icon_caution] The
front bezel is still attached to the iMac by itstwo cables.
[* icon_note] If your front bezel does not immediately lift off the rear case, lift the
lower edge justof the front bezel for enough clearance to insert a spudger and push up the two metal arms locking the bezel to clear the rear case.

Afbeelding 1

Oude versie

Nieuwe versie

Afbeelding 2

Oude versie

Nieuwe versie

Afbeelding 3

Oude versie

Nieuwe versie