Ga door naar hoofdinhoud

Wijzigingen aan stap #3

Bewerking door Dominik Schnabelrauch

Bewerking goedgekeurd door Dominik Schnabelrauch


Stap regels

-[* black] Insert wisdom here.
+[* black] After loosening the adhesive in the lower are of your phone with an opening pick, insert an other opening pick approximately 1/16 of an inch and slide it along both sides of the phone to sparate the display from the frame.
+ [* icon_caution] Take care! While you're loosening the adhesive beneath the upper part of your phone, do not insert the opening pick too deep between the display and the mid frame. The earpiece is placed right beneath the "Sony" Logo and you don't want to damage it.
+[* black] After loosening all the adhesive beneath the display twist the opening pick in the lower end of your phone a little bit to lift up the display.