Ga door naar hoofdinhoud

Wijzigingen aan stap #3

Bewerking door Andrew Ferguson

Bewerking goedgekeurd door Andrew Ferguson

Voor
Na
Ongewijzigd

Stap regels

-[* black] Use the T5 screwdriver to undo the two screws which hold the screen connector shield in place.
+[* red] Use the T5 screwdriver to undo the two black, 4mm screws which hold the screen connector shield in place.
[* black] After the shield has been removed, use the spudger or your fingernail to lift off the connector that holds the screen in place, being careful not to damage the connector.
[* black] Once the connector is removed, remove the display assembly completely and place it off to the side.

Afbeelding 1

Oude versie

Nieuwe versie