Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie

Onderdelen & Gereedschap

Wijzigingen aan stap #21

Bewerking door Andrew Bookholt

Wachtend op goedkeuring

Voor
Na
Ongewijzigd

Stap regels

[* black] Lift the logic board out of the midplane.
[* icon_reminder] When replacingreinstalling your logic board, makebe sure you reapplyto clean and apply a new layer of thermal paste to the U3 chip (highlighted in red) located on the underside of your logic board as well as its heat sink attached to the midplane.
[* icon_note] We have a
[guide|744|thermal paste]paste guide] that makes applying thermal paste a snap.
[* icon_reminder] When replacingreinstalling your logic board, makebe sure you reapplyto clean and apply a new layer of thermal paste to the U3 chip (highlighted in red) located on the underside of your logic board as well as its heat sink attached to the midplane.
[* icon_note] We have a
[guide|744|thermal paste]paste guide] that makes applying thermal paste a snap.

Afbeelding 2

Geen vorige afbeelding

Toegevoegd