Wijzigingen aan stap #4
Bewerken voor Doug Smith (Doogandazs) —
Bewerking goedgekeurd door Clay Eickemeyer
- Voor
- Na
- Ongewijzigd
Stap regels
| - | [* black] Remove silicone button covers by peeling back the silicone covering. This will expose the circuit board. |
|---|---|
| + | [* black] Remove silicone button covers by peeling back the silicone covering. This will expose the circuit board. Disconnect the ribbon cable. Carefully pry out the circuit board and set aside. Use a heat gun to remove all adhesive so that the ribbon cable can freely slide out of the slot in a later step. |