Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie

Winkel

Wijzigingen aan stap #6

Bewerking door Adam O'Camb

Bewerking goedgekeurd door Adam O'Camb

Voor
Na
Ongewijzigd

Stap regels

[title] Re-Assembly (Continued)
[* black] Once you have the retainer seated in the bezel, place the bezel face down on your watch face placing the side with the split[https://d3nevzfk7ii3be.cloudfront.net/igi/V5WpCtdt5KFUuqXH|split|new_window=true] in the retainer down first. If you do not do this, the retainer may not seat properly, as shown in the first photo.
[* black] Once you have the retainer seated in the bezel, place the bezel face down on your watch face placing the side with the split[https://d3nevzfk7ii3be.cloudfront.net/igi/V5WpCtdt5KFUuqXH|split|new_window=true] in the retainer down first. If you do not do this, the retainer may not seat properly, as shown in the first photo.
[* black] If that happens, gently pry the bezel and retainer up by hand, re-seat the retainer in the bezel, and try again.
[* black] Once you have successfully replaced your bezel on the watch, it should feel like new and rotate freely again.